The AVCP charger is for PDA, video camcorder and digital camera Li-ion batteries. It is suitable for different battery models to use, only to change the plate which is located on the top of the charger.
(A) How to change the charger plate
Part I: Release the charger plate
Step 1:
Press and hold the lock button to release the
interchangeable charger plate.
Step 2:
Pull out to release the charger plate.
Step 3:
Took out the plate.
Part II: Install the new charger plate
Step 1:
Attach the selected interchangeable charger
plate onto the charger base from the top into the slots.
Step 2:
Push the interchangeable charger plate fully in
the direction as shown in the above diagram.
Step 3:
The interchangeable charger plate is fully inserted into
the charger base only when you hear the sound “click”.
(B) Charging Method
Our Battery Charger have two charging method: AC Adapter and Car cord, They allow you to charge your battery at home or in the car conveniently.
Method 1:
Power by AC Power Adapter
Method 2:
Power by DC Car Cord
(C) Check the Charging Status
The LED indicator will show the charging status.
Here are the steps for using the charger
1. Plug the AC Adapter into the wall outlet or the DC car cord to the automobile cigarette socket.
2. Connect the AC Adapter or car cord to the charger DC in-jack.
3. The LED indicator show flashing GREEN when waiting for battery pack.
4. When the battery pack is placed onto the charger plate, the LED indicator will turn steady RED when the battery is being charging.
5. LED indicator flashes RED and GREEN alternatively when battery pack has been charged over 90%
6. When the battery pack is fully charged, the LED indicator will turn steady GREEN.
7. After the battery pack fully charged, slide the battery pack out from the charger and disconnect the power adapter from the outlet.